Welcome to RockMan Fabrication LLC
RockMan Fab Underseat Storage Box for Jeep Gladiator
The RockMan Fabrication Underseat Storage Box is designed to fit under the back seat of the Jeep Gladiator JT. Our box mounts to your Jeep using existing factory-threaded holes for easy NO-DRILL installation!
Just like our Jeep Wrangler Gear Drawer shown below, you can keep your gear such as tools, recovery gear or whatever you like to carry, out of sight and locked up.
The outside dimensions are 44.25"L x 9.5"W x 7.5" high in the front and 5.5" high in the back. The inside of the box measures 44"L x 9.25"W x 6.8"H to 4.75"H. That gives you 2,350 cubic inches of enclosed lockable storage.
These heavy duty boxes are made with 18 ga steel, finished in a matte black powder coat and have 2 metal, sealed, lockable compression latches.
The RockMan Fab Underseat Storage box comes with a rubberized drawer liner, 2 keys, all necessary installation hardware, and mounting instructions.
Price is $395.00 plus tax and shipping where applicable.
Local pick up with free installation available at the RockMan Fab shop in St Clair County, AL.
To purchase, contact us using the contact box below or email direct to chris@rockmanfab.com.
If you haven't seen a response within a day, please check your Spam or Junk mail folders.
RockMan Fab Heavy Duty Gear Drawer
The RockMan Fabrication Gear Drawer is designed to fit the Jeep Wrangler JKU and JLU. The drawer mounts to your Jeep using existing factory-threaded holes for easy NO-DRILL installation!
Keep your gear such as tools, recovery gear or whatever you like to carry out of sight and still have an open cargo area with tie downs to pile on your other supplies, camping gear or groceries.
The outside dimensions are 35" x 28.5" x 8". The inside of the drawer measures 32.25" x 28" x 6.5". That gives you 5,869 cubic inches of enclosed storage.
These heavy duty drawers are made with 18 ga steel (double-wall sides for extra strength to support cargo on top), finished in a light texture black powder coat, have heavy duty lock out slides and a stainless steel lockable latch.
The RockMan Fab Gear Drawer comes with a rubberized drawer liner, 2 keys, all necessary installation hardware, and mounting instructions.
Please Note: The Gear Drawer does not fit the 2 Door Jeep Wranglers.
ON SALE FOR A LIMITED TIME for $995.00 (Regular Price is $1,095.00) plus tax and shipping where applicable.
Local pick up with free installation available at the RockMan Fab shop in St Clair County, AL.
To purchase, contact us using the contact box below or email direct to chris@rockmanfab.com.
If you haven't seen a response within a day, please check your Spam or Junk mail folders.
Features Include:
- Stainless steel lockable latch.
- The 200 lb capacity drawer slides extend to almost the full length of the drawer for easy access to all the contents.
- Slides lock open for ease of use while parked on uneven surfaces.
Easy Access
The lock open latches on the slides also allow the drawer to be removed from the outer box for access to the factory “cubby” hole and jack storage on all JLUs and on JKUs that do not have the factory side subwoofer. (Always empty drawer of its contents before removal as it could be very heavy.)
More Features:
- The top features L-Track cargo tie-down rails on both sides with four tie-down loops included.
- The RockMan Fab Gear Drawer mounts into the factory tie down loop bolt holes with the included hardware. Does not require any drilling!
- Made in USA.
Fits Jeep JKUs with or without side subwoofer.
If you have a JK with a side subwoofer, we can furnish brackets that offset the Gear Drawer to the drivers side to accommodate.
RockMan Fabrication Tailgate Table
The RockMan Fab Tailgate Table is a unique design that opens upward to allow use of the drawer when the top table is deployed. But wait, there's more! A table extension slides out for more workspace. And for even more versatility, it also has a second, lower table for when you need maximum workspace.
Mounting hardware included.
JK and JL units are available now. The Tailgate Table will not fit the JK with the side subwoofer in place. You must remove the side subwoofer to add the table. You can leave the side subwoofer in place on the JL model Jeeps.
JKs require drilling 4 holes in the tailgate and installing rivet nut inserts.
JL units use 4 existing threaded holes in the factory tailgate behind the plastic trim panel. Two holes will need to be drilled in the plastic panel.
Introductory Price is $349.00 plus tax and shipping where applicable.
Local pick up with free installation available at the RockMan Fab shop in St Clair County, AL.
To purchase, contact us using the contact box below or email direct to chris@rockmanfab.com.
If you haven't seen a response within a day, please check your Spam or Junk mail folders.
Compact Design.
The upper table, table extension, and lower table fold up into a slim package (3" thick) that takes up very little of the valuable cargo space in a Jeep.
Works well with our Drawer system.
With the upper table and extension in use, you can still open the drawer fully. It still works great if you don't have our drawer system.